Last Updated : 27-Aug-2007
Issue Number : 8000505909
Category : Error Messages
Description : LED indications <CHECK INK U051 / U052 / U053 / U059>
How to install or remove ink cartridges

To print normally, install or remove ink cartridges in an orderly procedure.

< How to install ink cartridges >
1. After confirming that the printer is powered on, open the scanning unit (printer cover).
The ink cartridge holder moves to the replacement position.
Note:
After confirming that the scanning unit support < 1 > is fixed into position, release your hands.



2. Take out a new cartridge from its casing and gently remove the orange protective tape in the direction of the arrow.



Note
- Do not attempt to reattach the protective tape once you have removed it.
- Do not touch the gold electrical contacts or the print head nozzles after removing the protective tape.



3. Insert the ink cartridge into the ink cartridge holder.
- Black: the left slot
- Color: the right slot
Memo:
Push up the cartridge until it clicks into place.



4. Confirm that the ink cartridges are installed properly.

<1> The ink cartridge is not installed properly.
<2> The ink cartridge is installed properly.

5. Fold the scanning unit support and close the scanning unit (printer cover).
Wait until the preparatory operation is complete; it takes about one to two minutes.


<How to remove ink cartridges>
1. After confirming that the printer is powered on, open the scanning unit (printer cover).
The ink cartridge holder moves to the replacement position.
2. Push down the ink cartridge.
3. Remove the ink cartridges.
Note:
Handle the ink cartridges carefully to avoid staining clothes and surrounding work area.

"Was this helpful?"





Click here to go back.