Selecting Image Quality/Density/Copy Ratio (Copy)
06-Sep-2011
8200333600
Solution
You can make various settings for scanning documents. After finishing scan settings, press 
(Start) to start scanning.
(Start) to start scanning.You can adjust the image quality of copies according to the types of documents. A correct selection is necessary for the optimal reproduction of the colors of the document. These settings return to the default values if the machine remains idle for a certain period of time or if you press 
[Stop/Reset].
[Stop/Reset].The default settings is <TEXT/PHOTO>.
NOTE
- Combinations of these four modes (TEXT/PHOTO, TEXT, PHOTO, TEXT/PHOTO+) cannot be selected at the same time. If you select one of these modes, the previously set mode is canceled.
- If the document is a transparency, select the document type, then adjust the exposure to the most appropriate level for the document.
1. Place documents.
2. Press 
[COPY].
[COPY].3. Press 
[Image Quality] repeatedly to select the document type.
[Image Quality] repeatedly to select the document type.- <TEXT/PHOTO>: For documents that contain text and photos
- <TEXT>: For text documents
- <PHOTO>: For documents that contain fine text or photos
- <TEXT/PHOTO+>: For documents that contain fine text and photos
NOTE
Copy density automatically changes to the manual mode when <TEXT/PHOTO>, <PHOTO>, or <TEXT/PHOTO+> is set.
4. Use 
- 
[numeric keys] to enter the desired copy quantity (1 to 99).
- [numeric keys] to enter the desired copy quantity (1 to 99).5. Press [Start].
[Start].If you want to copy multiple documents using the platen glass, place a document and press [Start] once for each page. When scanning is complete, press [OK].
[Start] once for each page. When scanning is complete, press [OK].You can adjust the density to the most appropriate level for the document automatically.
1. Place documents.
2. Press 
[COPY].
[COPY].3. Press 
[Density] twice to select <AUTO>, then press [OK].
[Density] twice to select <AUTO>, then press [OK].NOTE
The image quality is automatically set to <TEXT>.
4. Use 
- 
[numeric keys] to enter the desired copy quantity (1 to 99).
- [numeric keys] to enter the desired copy quantity (1 to 99).5. Press 
[Start].
[Start].If you want to copy multiple documents using the platen glass, place a document and press [Start] once for each page. When scanning is complete, press [OK].
[Start] once for each page. When scanning is complete, press [OK].You can adjust the density to the most appropriate level for the document manually.
1. Place documents.
2. Press [COPY].
[COPY].3. Press 
[Density] to select the manual mode.
[Density] to select the manual mode.4. Press [ 
] or [ 
] to adjust the copy density, then press [OK].
] or [ ] to adjust the copy density, then press [OK].- [ ]: to make light documents darker
- [ ]: to make dark documents lighter
NOTE
- To cancel all settings, press [Stop/Reset].
- When you switch the mode by pressing the mode keys such as
[FAX], all settings will be canceled. If you want to keep the settings, set the density as follows: 
[Menu] -> <COPY SETTINGS> -> <STANDARD SETTINGS> -> <DENSITY> -> <MANUAL>
5. Use - [numeric keys] to enter the desired copy quantity (1 to 99).
- [numeric keys] to enter the desired copy quantity (1 to 99).6. Press [Start].
[Start].If you want to copy multiple documents using the platen glass, place a document and press [Start] once for each page. When scanning is complete, press [OK].
[Start] once for each page. When scanning is complete, press [OK].You can enlarge or reduce standard size documents to another standard paper size.
1. Place document.
2. Press [COPY].
[COPY].3. Press [Enlarge/Reduce].
[Enlarge/Reduce].4. Press [ ] or [ ] to select the copy ratio, then press [OK].
] or [ ] to select the copy ratio, then press [OK].<200% MAX.>
<141% A5 ->A4>
<122% A5 ->B5>
<115% B5 ->A4>
<100%>
<86% A4 ->B5>
<81% B5 ->A5>
<70% A4 ->A5>
<50% MIN.>
NOTE
When <PAPER SIZE GROUP> in the <COPY SETTINGS> menu is set to <A> or <AB>, the preset copy ratios change as follows:
INCHES: 50%, 64%, 78%, 100%, 129%, 200%
A: 50%, 70%, 100%, 141%, 200%
5. Use - [numeric keys] to enter the desired copy quantity (1 to 99).
- [numeric keys] to enter the desired copy quantity (1 to 99).6. Press [Start].
[Start].If you want to copy multiple documents using the platen glass, place a document and press [Start] once for each page. When scanning is complete, press [OK].
[Start] once for each page. When scanning is complete, press [OK].You can enlarge or reduce images by any copy ratio, in 1% increments. The available copy ratios are from 50% to 200%.
1. Place documents.
2. Press [COPY].
[COPY].3. Press [Enlarge/Reduce] twice.
[Enlarge/Reduce] twice.4. Use - [numeric keys] to enter the copy ratio, then press [OK].
- [numeric keys] to enter the copy ratio, then press [OK].You can also use [ ] or [ ] to adjust the zoom ratio. To increase the zoom ratio, press [ ]. To decrease the copy ratio, press [ ].
] or [ ] to adjust the zoom ratio. To increase the zoom ratio, press [ ]. To decrease the copy ratio, press [ ].NOTE
To return the copy ratio to 100%, press [Enlarge/Reduce] repeatedly to display <100%>, then press [OK].
[Enlarge/Reduce] repeatedly to display <100%>, then press [OK].5. Use - [numeric keys] to enter the desired copy quantity (1 to 99).
- [numeric keys] to enter the desired copy quantity (1 to 99).6. Press [Start].
[Start].If you want to copy multiple documents using the platen glass, place a document and press [Start] once for each page. When scanning is complete, press [OK].
[Start] once for each page. When scanning is complete, press [OK].2 on 1 mode automatically reduces two documents to fit on the selected paper size. You can make well-organized copies by copying multiple documents onto one sheet. This mode enables you to cut print costs by saving copy papers, and it is also useful for saving space.
The default setting is <OFF>.
NOTE
The reduction ratio is automatically set so that the documents fit onto the selected paper size.
1. Place documents.
2. Press [COPY].
[COPY].3. Press [Collate/2 on 1] repeatedly to select <2 ON 1>, then press [OK].
[Collate/2 on 1] repeatedly to select <2 ON 1>, then press [OK].4. Use - [numeric keys] to enter the desired copy quantity (1 to 99).
- [numeric keys] to enter the desired copy quantity (1 to 99).5. Press [Start].
[Start].If you want to copy multiple documents using the platen glass, place a document and press [Start] once for each page. When scanning is complete, press [OK].
[Start] once for each page. When scanning is complete, press [OK].NOTE
- To cancel all settings, press [Stop/Reset].
- Up to 4 mm margin will be produced between the two reduced documents in 2 on 1 copying.